# What is a 3/32 bike chain?

Contents

A 1/8″ chain is the most common chain found on single speeds, and 3/32″ chain is the most common chain found on derailleur equipped bikes. A 1/8″ chain will fit on parts that are either width. 3/32″ chains will only fit on parts designed to work with 3/32″ chains.

## What does a 3/32 chain mean?

Nominally derailleur chains are called “3/32-inch chain.” However that is not a true measurement, as modern derailleur chains can vary from that sizing. Some nominal widths measured across the rivet between chains are: 12 rear cogs — 5.3 mm. 11 rear cogs — 5.5 mm. 10 rear cogs — 6 mm.

## What is a 3/32 bike chain?

3/32″ (0.094″, 2.30 mm) chain is used on derailer equipped bicycles that have more than 3 cogs at the rear. Even somewhat narrower chain, typically . 090″ or 2.29 mm between the inner plates, is used for derailer-equipped bicycles with 9 or more sprockets at the rear.

## What size chain is 3 32?

Chains with 3⁄32 in (2.4 mm) wide rollers are generally used on bikes with derailleurs such as racing, touring, and mountain bikes. Fixed sprockets and freewheels are also available in 3⁄32 in (2.4 mm) widths so fixed-gear and single-speed bikes can be set up to use the narrower and lighter 3⁄32 in (2.4 mm) chains.

## How do I know my bike chain size?

Add the multiplied chainstay length, the divided number of teeth for the chainring and rear sprocket, and add 1 (or 2.5 cm). The result is the ideal chain length for your bike. For example, you’d add 32.5, 13, 7 and 1 to get 53.5. The length of the chain should be 53.5 inches or 135.89 cm.

## What is the difference between 1 8 and 3/32 chain?

A 1/8″ chain is 3.18 mm, and a 3/32″ chain is 2.30 mm. … The 3/32″ chain will be slightly more flexible than a 1/8″ chain, which means it will be a bit happier if your chainline is not very straight. Using a track frame and track style crankset you should not have this problem.

## What chain should I use for single speed?

If you have a single-speed bike or one with internal gears, the chain type will be 1/8″ in internal width. In this category you will find cruiser bikes, urban bikes, fixies or models with internal gears, among others. If you have a bike with a derailleur, with 2 to 11 sprockets, you will need chains of 3/32″.

## Do SRAM chains work with Shimano?

Shimano and SRAM 11-speed chains are cross-compatible. If you have a Shimano 11-speed drivetrain, a SRAM chain will work fine and vice versa, however manufacturer’s recommend pairing your components for optimal performance.

## Will a 12 speed chain work on 11-speed?

Condensed answer: A 12-speed chain can work with an 11-speed cassette. However, it’s recommended to avoid using a Shimano 12-speed chain because it doesn’t play well with 11-speed chainrings.

## Will a 9-speed chain work on a 10 speed cassette?

In some cases, a 9-speed chain may work just fine with a 10-speed cassette. In general, however, running a chain designed for fewer speeds than the cassette is not considered a good practice. The 9-speed chain is wider and can rub and skip when combined with a 10-speed cassette.

IMPORTANT:  Does riding a stationary bike make your legs stronger?

## What size chain should I get?

After a measurement is obtained, its a good idea to opt for a necklace size that is at least the second size up from your neck size. For example, if you have an 18 inch neck, you should probably choose a chain length of 20 inches or more. An 18 inch chain would feel too tight.

## How do you measure chain size?

1. Pitch is measured by finding the distance from the center of one pin to the center of the next pin in line. …
2. Determine your side plate height and thickness by measuring both inside and outside the roller chain to ensure that you’re seeing a good average size.

## How do you measure the width of a bicycle chain?

It is measured by measuring the distance between 3 links, then dividing it by two.

1. Chain pitch is shown with green markers, though it is determined by measuring the distance between 3 adjacent pins (blue mark) and dividing it by two.
2. Inner chain width, marked with blue arrows and lines.
3. From left to right:

## How do you replace a bike chain?

How to replace a bike chain in eight steps

1. Remove the old chain. First, jettison the old chain. …
2. Clean the cassette. Now is a good time to clean and inspect your chainrings and cassette. …
3. Thread the new chain. …
4. Work out the correct length. …
5. Cut to size. …
6. Insert the pin. …
7. Push the pin home. …
8. All done.